Demand for Jones and Attwood’s Washpactor system for washing, removing and compacting

raw sewage screenings has been driven by higher performance requirements for pre-treatment

of STW inflows.

At the heart of the system is a tank in which an impeller creates high-rate

turbulence which liquifies organic solids in the screenings. Meanwhile the displacement

created by the incoming water combined with energy surges from the impeller

causes the water and washed solids to overflow into an exit channel.

Dirty water and washed solids are delivered to a screw compactor housed in

a perforated U-trough which acts as a fine screen and drains off the dirty water.

The retained screenings are rinsed then forwarded to an inclined chute. Material

accumulated within the chute provides the backpressure for satisfactory dewatering

of the clean screenings.

The unit needs to be very robust. Screening raw sewage removes sizeable solids

which can include metal, bricks, stones and vast quantities of grit. Indeed

the quantity of grit increases exponentially as screen-hole diameters decrease,

which has been a significant trend in screen design over the last few years.

Much of the development work undertaken with Washpactor relates to improving

the resilience of the system to increasing levels of grit. The impeller housing

is subject to high levels of abrasive attack from grit impacting its surface

at speed. To reduce wear on this component, Jones and Attwood has developed

an abrasion-resistant plastic lining.

The impeller is also vulnerable to erosion, and a two-section model has been

introduced to help resolve the problem of excessive wear. The vaned impeller

disc is ultra-hard and durable, while the shaft and mounting plate remain in

place with the mechanical seal during impeller replacement, helping making the

task quicker and easier.

The screw compactor, which dewaters the screenings, works for long periods

under backpressure and in an abrasive environment. As a result, the manufacturer

has developed a specially-designed thick-wall sleeve bearing which has vastly

reduced wear on the screw and in turn prolonged the life of associated components.

To reduce further stone and grit wear, Jones and Attwood has introduced preventative

as well as curative measures. The company has designed traps, which are fitted

to the launder feed system supplying material from the screens to the Washpactor

tank. The traps remove heavy debris and can be emptied manually or automatically.

The Washpactor range varies from the Mini version, which processes 0.68m3/hr

of screened solids to the No. 6, which can deal with 12m3/hr. Independent analysis

has shown the average result for product dryness and BOD are 52% dry solids

and 10g/l BOD.

To get the most efficient operation from the Washpactor it is important to

size the equipment according to site-specific conditions, especially the volume

of screened solids to be processed. To help with this, Jones and Attwood’s technical

department can design the right system for a client’s application. The configuration

and layout of each Washpactor can be tailored to suit the STW design. It is

important the client provides the manufacturer with throughput data along with

site-specific design and layout requirements.

When sizing equipment it is generally assumed the delivery of screened material

is as near continuous as possible. Where the flow varies or the equipment is

at rest for long periods, it is usually necessary to provide a system tailored

for the largest instantaneous flow. Multiple units are used to deal with extra

high volume requirements and in other instances a single machine has dedicated

duty to an individual screen.

Action inspires action. Stay ahead of the curve with sustainability and energy newsletters from edie

Subscribe