Gas Data's LMSr environmental monitor allows engineers to view progress of tests without having to collect data from site.
Data, such as sequential gas samples taken from up to 16 sample points on pipelines or ground bore holes on a landfill site is gathered from the instrument remotely using the GSM connection to www.gasdata.net
Designed for medium term site monitoring, the system is based on an electronic instrument with typically 20 channels of measurement, each configured to suit the range necessary for the particular application.
Typical measurement channels are as follows;
Infra red/electrochemical gas analysis (Methane, carbon dioxide, oxygen, carbon monoxide, hydrogen sulphide etc.)
Pressure measurement (Gauge and/or absolute)
Temperature -10 to +2000 C depending on probe used
Gas velocity/flow using anemometer devices
Interface to orifice plates and pitot tubes
4-20 mA signals from existing plant e.g. Gas flare temperature
Telemetry using mobile phone (GSM or GPRS) technology
Suitable for outdoor use with minimal or no weather protection, the instrument measures all channels according to how the user chooses to set the data logging parameters. Power is provided ether by internal batteries (supported by solar if necessary) or a mains supply.