Ex-Or manufacture lighting controls for all applications including, presence detection, lighting management systems, architectural dimming and scene-setting and emergency lighting testing systems.
Ex-Or Lighting Management Systems can be used to:
Save Energy and Save Money
Enhance the working environment
Ensure compliance with legislation
Reduce the impact of the Climate Change Levy
The Ex-Or MLS Digital Managed Lighting System has been designed to provide optimum lighting conditions and maximum flexibility for office lighting projects of any size.
The Ex-Or MLS Digital offers considerably more benefits than stand-alone lighting control options and time-of-day lighting management systems. It can provide a fully integrated lighting and lighting management scheme far more effectively than similar specification luminaires driven by a conventional time-of-day lighting management system.
The enhanced performance of the system is made possible by using communicating presence detectors. Information on the current state of occupancy within the building runs through the low voltage bus network. Physical barriers such as walls and partitions do not impede this process.
MLS Digital Detectors communicate occupancy information throughout a building via a low voltage dedicated bus. This ability makes many of the unique features possible.
Setting-up zones of detectors
MLS Digital Detectors may be set-up to switch luminaires in groups over nominated work zones. These zones may be easily re-configured without alteration to hard wiring.
Operation of zones of detectors
Presence detected anywhere within the zone ensures all the luminaires in the group remain on.
Operation of common zones
Notional corridors and safety routes may be configured as common zones which are held on together when there is activity elsewhere on the bus.
Luminaires with regulating ballasts compensate for daylight automatically to ensure a constant lighting level on the working plane.
MLS Digital introduces unique features never before seen in a lighting management system of this kind:
Users can set up to six lighting scenes by infrared remote control and recall them with a single press of a button.
Entry and exit scenes
The entry scene is automatically selected when the area becomes occupied. Similarly, there is an option to select an exit scene for when an area is vacated.
Groups of luminaires may be brightened, dimmed and switched on/off by remote control.
By assigning the MLS Digital Detector to one of two global zones it can be activated from a single position which would be beneficial for security and when load shedding may be necessary.
MLS Digital is suitable for both DALI and DSI ballasts.
Contact Charmian Cvek