Fits on any sub floor and under any flooring
A primary heat source ( no need for radiators)
Heats to optimum temperature in 3 mins
Easy to install and control
Suitable for whole house or single room
Part "L" complient for newbuilds
Massive 15 year warranty
The most efficient underfloor heating on the market
Easy-Heat is the perfect way to insulate any room when laying underfloor heating where an adhesive is required to stick the flooring down (i.e. ceramic, slate, stone, marble, etc).
Uninsulated floors will act as a heat sink absorbing most of the heat energy created by the underfloor heating, if you choose not to insulate the floor before installing underfloor heating you will find that the power usage will be at least double that of the same system with insulation.
By installing Easy-Heat insulation between the subfloor and the underfloor heating system the heat energy is forced upwards through the floor covering, this will ensure the rooms ambient temperature is reached more efficiently and allow the thermostat to switch as needed.
By adding Easy-Heat to your installation you will immediately save up to 50% on your heating cost compared to installing on a bare subfloor.
A high ratio of mechanical strength to weight gives excellent spanning capabilities and makes Easy-Heat highly portable and superb on-site manageability. Easy-Heat can support weights of 30 tonnes per meter square.
High Water & Moisture resistance
The closed cell structure of Easy-Heat minimises water absorption offering protection against damage or deterioration when exposed to the damp.
Bonding properties
The smooth, dust free, surface of Easy-Heat provides an optimum base for bonding and laminating.
Application
The generic form of Easy-Heat is used to as an insulation in double glazed doors & windows, caravans, lofts, wall cavity insulation, floors and much more
Contact Mr Chris Sampson
30 Chester Street
Mold
Clwyd
Flintshire
CH7 1EG
United Kingdom
www.allbriteuk.co.uk
