The low-maintenance and accurate sonde of the future
Since January, engineers have been trialling a new version of Intellitect Water's Intellisonde FE. Designed to broaden online monitoring advantages in wastewater treatment plants, the signs are that it will perform efficiently and save money.Engineers at Intellitect Water have developed a version of the company's innovative multiparameter water quality monitoring sonde, the Intellisonde FE that has been designed to bring the advantages of online monitoring to a much larger proportion of wastewater treatment plants.
One of the new sondes has been on trial at Wessex Water's sewage treatment works (STW) in Bournemouth.
The monitor was installed in January 2010 at the plant's outfall, adjacent to traditional online monitoring instruments, and Wessex Water's regional waste scientist Mike Robinson says: "The trial is proceeding very well, with the Intellisonde FE producing measurements that closely mirror data from our other monitors and from manual tests."
Dedicated server The Intellisonde FE is located in a flow-though chamber that is fed by a submerged sampling pump located in a sump. A level gauge ensures that the sump does not pump dry.
Inside the sonde head, tiny solid-state sensors continuously monitor conductivity, pH, temperature, turbidity and ammonium.
The unit can log at intervals between one minute and one hour on all parameters simultaneously and recorded on an internal datalogger. However, data is transmitted via GPRS to a dedicated server that feeds a website to enable 24/7 access to (almost) live water quality information.
The graph shows recorded data during February and March 2010 and Robinson reports that no calibration or maintenance was necessary during this period.
It can be seen that rainfall / stormwater events have a significant effect on temperature and conductivity.
Intellitect Water's technical director, David Vincent, believes that recent changes in monitoring requirements will greatly enhance the demand for the new Intellisonde FE.
He explains: "The Environment Agency (EA) is currently engaged upon a programme of passing the responsibility for collecting, analysing and reporting discharge quality to operators.
"At the same time, the level of monitoring required will depend on the level of pollution risk that each discharge represents. Consequently operators, such as the water industry and the process industries, will have to develop a monitoring strategy that meets the requirements of the EA."
Occasional sampling and analysis can be lower in cost than online monitoring. However, the main disadvantages are that a pollution incident could go undetected between sampling times and infrequent data does not support process optimisation.
In contrast, Vincent says: "The Intellisonde FE will provide continuous access to effluent quality data and thereby help to raise compliance levels even further."
Key features of the Intellisonde FE technology include:
· Solid state membrane-free sensor technology
· Tiny 'plug-and-play' sensors
· No requirement for chemical reagents
· Robust and highly accurate
· Built in data logger
· GPRS capability
·Easy to use, with no special software
The Intellisonde FE will also provide major financial advantages. It is priced for volume deployment, significantly below traditional effluent monitoring systems, which means that it will become cost-effective for a much larger proportion of works and will save the cost of sampler visits and analysis.
From a water company perspective, Robinson says: "If we can prove that the lifetime costs are as low as they appear and if the unit continues to perform reliably, the lack of a requirement for chemicals coupled with a low maintenance requirement will mean that the Intellisonde FE could find application at a large number of treatment works."