The standard range of TOVEKO filters, for small & medium flows, is constructed in stainless steel, 304L being the standard grade. For more corrosive duties, for example where the total salt concentration (and particularly chloride) is substantially higher, 316, SAF2205 and 254 SMO grades are also used.
The filter is rectangular in section and, being only 2.3m tall at the highest point, has a small footprint.
Where protection from the elements is required, it fits comfortably into a normal height room. The smallest “S-type” filters pass comfortably through a standard 1.8m double door, while the larger “T-type” requires a 3m door.
The TOVEKO filter’s sand washer is highly effective, making it particularly suitable for removing sticky / stubborn solids such as excess polymer or oil. At the same time, the filter uses wash water frugally. Depending upon the type & concentration of solids, the wash water required is typically between 2 & 5% of the service flow.
For larger flows, TOVEKO filters are available as underground, concrete units. Typically, concrete units are more cost effective for larger flows and, where underground units avoid the need for even low head pumping stations for large flows, the savings in capital and operating costs can be substantial.
TOVEKO filters are backed up by Organo’s service department, which operates nationwide. In common with all Organo products, we offer clients cradle-to-grave technical support, service and maintenance.
More detailed information can be obtained either by contacting us directly or by visiting our website.
Organo
Worth Corner,
Pound Hill,
Crawley
West Sussex,
RH10 7SL
Tel: +44 (0)1293 882346
Fax: +44 (0)1293 882376 / 882348
Email:sales@organo.co.uk